Tork Craft Diamond Core Bit 20Mm For Tiles

R110.99

Tork Craft, the name everybody knows. Quality tools and accessories for every job. Every new Tork Craft product goes through our Product Testing department for quality approval. Browse the Tork Craft website to experience the extensive catalogue.

This item ships from our supplier. You should recieve it in approx 2-5 working days.
Visit our Shipping Policy
Buy Now, pay later

Choose the option that suits you at checkout, and we will ship it immediately once the order is approved.

Ts and Cs: Additional charges may apply at checkout. | Quantity discounts, Free Shipping and Discount Coupons are not redeemable.| These are third party FSPs, Livestainable (Pty) Ltd is not involved in applications or approval.

Choose 2, 3 or 4 monthly interest-free instalments of R27.75 using Float.
Find out more
Pay 12 monthly instalments of R10.17 using Mobicred.
Find out more
Pay 3 monthly interest-free instalments of R37.00 using PayJustNow.
Find out more

Description

Tork Craft Diamond Core Bit 20Mm For Tiles

Tork Craft, the name everybody knows. Quality tools and accessories for every job. Every new Tork Craft product goes through our Product Testing department for quality approval. Browse the Tork Craft website to experience the extensive catalogue.

Ø20Mm Diamond Core Bit

Application:

The Diamond Core Bit Is Used To Drill Holes In:

  • Ceramic Tiles
  • Marble
  • Grade 5 Porcelain (Hardest)
  • Granite
  • Glass
  • Slate

The Diamond Core Cuts Faster, Smoother And Lasts Longer Than Any Other Coredrills.

How To Use The Diamond Core Bit:

The Diamond Core Drill Bit Must Be Used With Water At All Times Whendrilling. The Water Serves As A Coolant To Prevent The Diamonds Fromoverheating. The Maximum Allowable Temperature For A Diamond Core Bit Is 500&Deg;C.

There Is No Pilot Drill With The Diamond Core Bit. A Low Rpm Rotary Drillwith A Planetary Gearbox Is Required To Be Used With A Diamond Core Bit. It Ispossible To Use A Cordless Drill, But In The Lowest Gear Setting. No Hammeraction Is Used.

  1. Tightly Fasten The Diamond Core Bit In The Drill’S Chuck.
  2. Keep The Bit Steady At A 45? Angle With The Starting Point On The Edge Of The Assigned Area To Be Drilled Whilst The Bit Is Rotating.
  3. A Notch Will Be Made (This Is Normal). Gradually Move The Drill From 45&Deg; To 90&Deg; And Continue Drilling Until Finished.
  4. Allow The Diamond Core Bit To Cool Down Completely Before Proceeding To Drill Another Hole.

Water Can Be Applied By:

  • Spraying Water On The Surface,
  • Using A Wet Sponge,
  • Attaching A Water Feed Device. This Is Necessary When Drilling Into A Wall Tile.

Please Have A Look At The Video In The Tabs Aboveshowing How To Use The Diamond Core Bit.

An Indication Of The Correct Spindle Speed:

Diamond Core Bit Diameter Spindle Speed
Ø5.0Mm 800 Rpm
Ø6.0Mm 600 Rpm
Ø7.0Mm 500 Rpm
Ø8.0Mm 500 Rpm
Ø10.0Mm 400 Rpm
More Than Ø10.0Mm (>10.0Mm) Less Than 400 Rpm

&Nbsp;

Important:
The Tool Life Will Mostly Depend On The Proper Usage And The Hardness Of The Itemsdrilled Into. It Is Normal For A Diamond Core Bit To Last Up To 10 Or Moredrilled Holes In Hard Tiles. Please Remember To Always Usewater When Drilling With Diamond Core Bits.

&Nbsp;

Brand :Tork Craft
SKU :TC180820
Barcode :6009515802387

Important Notice: Livestainable relies on the relevant suppliers/manufacturers and/or third-party sellers to provide adequate information displayed on the products we promote on Livestainable.co.za. Therefore, in some cases Errors and Omissions could be expected.

Noticed incorrect information or an issue with this page? Let us know

Additional information

Weight 2 kg !
Shipping Dimensions L 15 × W 8 × H 4 (cm) !
Barcode

6009515802387

SKU TC180820
CATEGORY
TAGS , ,